AHA Distributing || Product Pages || LB4TM
LB4TM
Near
Near LB4TM
LB4TM NEAR 2-WAY, 4 1/2" LF, 8-OHM/70V, MULCH BROWN
Availability:
FL: Low Stock – Call
GA: Low Stock – Call
Retail: $319.00 EACH


LB4TM

4" 2-way weatherproof loudspeaker with built-in 70V transformer and 16-Ohm bypass, Mulch Brown finish

The NEAR® LB4TM all-environment loudspeaker is elegantly designed, rugged to the extreme and a snap to install. The LB4TM employs a ball and socket "signature" mounting system combined with a pre-terminated totally waterproof input connector. This mounting system minimizes installation effort and reduces “ladder time” to improve installation efficiency and safety. The LB4TM utilizes a 4-inch MDT/MLS woofer with a 1-inch titanium inverted dome tweeter for perfectly life-like sound dispersed evenly over a wide area.

The NEAR® LB4TM all-environment loudspeaker is elegantly designed, rugged to the extreme and a snap to install. The LB4TM employs a ball and socket "signature" mounting system combined with a pre-terminated totally waterproof input connector. This mounting system minimizes installation effort and reduces “ladder time” to improve installation efficiency and safety. The LB4TM utilizes a 4-inch MDT/MLS woofer with a 1-inch titanium inverted dome tweeter for perfectly life-like sound dispersed evenly over a wide area.

This version of the LB4 differs from the LB4T in its color (mulch brown) and its   low impedance bypass rating of 16 Ohms. It is the ideal speaker to use when using multiple pairs driven by a low-impedance output (non-70V) amplifier.  

70Volt Control and Convenience

This "T" version of the LB4 features a built-in multi-tap 70V transformer (with 16-Ohm bypass option) for use with the NEAR 6XL or other 70V output-equipped amplifiers. 70V systems have a myriad of advantages including being able to run more speakers in parallel than would be possible with low impedance systems. It also allows you to "sound sculpt" an area by assigning different volume levels to each speaker in the system. 

This version of the LB4 differs from the LB4T in its color (mulch brown) and its   low impedance bypass rating of 16 Ohms. It is the ideal speaker to use when using multiple pairs driven by a low-impedance output (non-70V) amplifier.  

70Volt Control and Convenience

This "T" version of the LB4 features a built-in multi-tap 70V transformer (with 16-Ohm bypass option) for use with the NEAR 6XL or other 70V output-equipped amplifiers. 70V systems have a myriad of advantages including being able to run more speakers in parallel than would be possible with low impedance systems. It also allows you to "sound sculpt" an area by assigning different volume levels to each speaker in the system. 

Key Features:

  • Driver Complement: (1) 4” Metal Alloy Diaphragm Woofer, MLS Voice Coil Guidance, UV and Chemical Resistant Rubber Surround; (1) 1.1” Metal Alloy Diaphragm Tweeter, Ferrofluid Damping, Corrosion-Resistant Magnet Assembly
  • Frequency Response – 75Hz to 19kHz, +/-3dB
  • Sensitivity (1W/1M) - 86dB @16 Ohms
  • Dispersion - Minimum 120 Degrees, Horizontal & Vertical
  • Power Requirements - 70 Volts with selectable 32, 16, 8, 4. and 2 Watts power output; 16-Ohm bypass up to 75 Watts (Ave); 300 Watts (Peak)
  • Dimensions – 5.51”W x 10.25”H x 6.3”D; 14cm W x 26cm H x 16cm D
  • Product Weight (with mounting yoke and clamp) 4.5lb. / 2.04kg
  • Maximum SPL @1M (1/2 space) 105dB
  • Input Terminations – Waterproof Plug-in Connector Included (IP68 Rating)
  • Environmental – Designed to Meet or Exceed Mil-Std-810 (Humidity, Salt Air, Heat, Cold, Immersion); IEC IP 56

© Copyright 2020 AHA Distributing
All Rights Reserved
Powered by UPPmarket, Inc.
Get in Touch.
We're here to help!

Contact Us
We accept: